Overview

Stationary Infantry Target - MOUT

Unlike regular pop-up mechanisms this system simulates six different adversary movements. These include peering over a cover with the “climbing target” mode and stepping sideways out of a cover with the “dodging target” mode. The increased variety of target presentations and the greater training realism enhances training results and creates a diversity unknown to conventional training equipment.

Designed specifically for multifunctional MOUT Ranges, the lifter is supplied with an easy-to-install mounting frame. Once the frame is positioned, it vigorously presents any infantry target silhouette jumping out of a door, appearing from behind a tree, or spying out of a window opening.

At a glance:

• Specifically designed for CQB, MOUT & FIBUA training
• Realistic target performance
• ONE target mechanism – SIX different target presentations
  
• Little space requirement
  

Up to now, more than 5000 units utilizing the Target-Cube have been sold and presently are in continuous production since 1996. Overall over 25 000 Theissen Infantry Target lifters have been delivered.

The Stationary Infantry Target - MOUT is also referred to as MOUT Targetry System, MOUT SIT, MOUT Target, Swivel Target, Friend Foe Target, FIBUA Target, Fibua SIT, CQB Target..

Features

General Features

The Target-Cube lets this Stationary Infantry Target mechanism lift, slash or turn infantry target silhouettes precisely and vigorously. Used with the short rail system the target presentation can be altered to dodging and sliding target exposure.

An external target controller (TC) ensures the communication to the range controller, whether it is the computerized control facility (TACF) or the TTS remote control unit (RCU).

The system can be conveniently installed by a single person and hence repositioned to easily modify training scenarios. The location can be altered without the need of infrastructure adaptations.

• Realistic Training Environment

  Realistic Training Environment

  TTS products increase training realism and stress.
  

  

  Realistic Training Environment

  Several add-ons and accessories are available for TTS target mechanisms to increase training realism and stress.
  

  Enemy fire simulators and hit indicators are added to the target appliances and are used to give a more realistic training environment. The simulators make use of standard pyrotechnic ammunition or are non -pyrotechnic simulators, increasing the safety of the range personnel while reducing the life cycle costs. As more and more modern weapon systems are equipped with infrared night visors, all our target appliances can be equipped with thermal target heating systems, which provide a thermal image on the target that can be clearly identified.

• Flexible Range Layout

  Flexible Range Layout

  TTS Target appliances allow diversified training scenarios.
  

  

  Sorry, Image will be uploaded soon...

  This TTS Target appliance offers various movements and/or speeds to ensure diversified training scenarios and to avoid familiarization effects. For a highly flexible range layout on shooting ranges most TTS target equipment is designed in a way that its location can be altered without the need of infrastructure adaptations. If required our Equipment will be delivered meeting these requirements:

  • Man-portable
  • Powered by Batteries or Generator
  • Radio remote controlled

• Pop Up or Lifting Mode

  Pop Up or Lifting Mode

  The target raises out of a cover and lowers.
  

  

  Pop Up Mode - Raised

  This conventional mode allows the presentation of a target raising out of a cover and lowering to hide behind a drawback.
  

• Friend & Foe Mode

  Friend & Foe Mode

  Alternative presentation of a friend or a foe target is possible.
  

  

  SIT Swiveling

  This mode allows the alternative presentation of a friend or a foe target; the targets' side view represents the neutral position since the target board appears to be invisible. Typical applications are pistol shooting and special forces training.
  

• Slashing Mode

  Slashing Mode

  The mode allows the presentation of a target jumping sideways into an opening or a door.
  

  

  Slashing Mode

  The mode allows the presentation of a target jumping sideways into an opening or a door. A typical application is CQB training.
  

• Shearing or Scissors Mode

  Shearing or Scissors Mode

  The silhouette can be sheared to the left or to the right
  

  

  SIT Scissoring

  This mode allows the presentation of a target spying around a corner. It can be used instead of the lifting mode when not enough space is available.
  

• Climbing Target Mode

  Climbing Target Mode

  Targets can be lifted into an opening.
  

  

  Climbing Mode

  In the climbing mode infantry silhouettes can be lifted into an opening for highly realistic target presentation.
  

• Sliding Target Mode

  Sliding Target Mode

  Here the target can be driven out sideways.
  

  

  SIT Sliding

  This mode allows the presentation of a target spying around a corner. It can also  be used instead of the lifting mode when not enough space is available.
  

Economical Features

• Energy Efficiency

  Energy Efficiency

  Finely tuned electrical and mechanical engineering provides this Theissen target lifter with an extraordinary energy efficiency.
  

  

  Sorry, Image will be uploaded soon...

  With its standard 12 V-36 Ah battery the highly efficient design allows up to 20.000 movements (10.000 cycles) without charging.
  
  

Components

• Gel Batteries

  Gel Batteries

  Hig grade gel batteries are supplied with TTS products.
  

  

  Gel Batteries

  Gel batteries assuring safe usage, good weather resistance and reduced maintenance are supplied with TTS products.
  

• Quick Power Connectors

  Quick Power Connectors

  TTS products are supplied with easy-open “Quick Power” connectors.
  

  

  Safety Connectors

   All battery powered TTS products are supplied with easy-open “Quick Power” connectors for easy access and service.
  

• Target Cube

  Target Cube

  The target mechanism`s basic component assures swift movements of targets.
  

  

  Theissen cube

  The Target Cube is lifting any infantry target silhouette precisely and vigorously to simulate a suddenly appearing and disappearing infantry target. It can be programmed to create lifting, slashing, turning or swiveling movements.
  

  The Target Cube’s world-patented 4 in 1-technology makes this product also economical. This principle avoids extra costs for storage of spare parts, which would be needed if separate devices for the four purposes would be used. Likewise, less training is required causing a significant reduction of maintenance costs.

  The Target Cube allows multiple target movements. It can be fixed with a stainless steel clamp in two different positions allowing the following moves:

  • Lifting (raising/lowering)
  • Shearing (shearing up/shearing down)
  • Slashing (swinging in/swinging out/neutral)
  • Turning or Swiveling (friend/foe/neutral)

  With an Add-On the Target Cube© can even be swiftly modified to allow a sliding target presentation.

  The Target Cube is also referred to as SAPU Würfel, Theissen-Cube.

• Target Controller

  Target Controller

  Most target mechanisms are supplied with a lightweight Target Controller.
  

  

  Target Controller

  The controller's housing is made from powder coated, high-grade aluminum. To avoid internal corrosion and to maintain a consistent and optimal performance under all environmental conditions, from equator to the poles, the housing is sealed with a premium sealant. The configurable settings are addressing the complexity of military training and allows a variety of custom operating settings:

  • Number of hits to drop the target
  • Display time, for which the target shall be shown
  • Delay time, after which the target will be raised again automatically
  • Sensitivity of hit sensor
  • Target illumination (optional)
  • Brightness of the illumination (optional)
  • Target heating system (optional)

• Target Fastener

  Target Fastener

  Infantry target mechanisms are supplied with this ruggedized target fastener.
  

  

  Target Fixture

  To avoid heavy weight this arm is made from high-grade cast alloy and to make it wear resistant it is supported with stainless steel inlays.

  The lightweight aluminum target fastener is stainless steel reinforced and powder coated. Little weight allows swift movements, reinforcement prevents creep fatigue and powder coating ensures weather resistance.
  

  The target fastener accepts most standard target silhouettes.
  

  At a glance:

  • High Grade Cast Aluminum
  • Low Weight
  • Stainless Steel Reinforced

• Piezo Hit Indication

  Piezo Hit Indication

  TTS Target equipment is supplied with a remotely adjustable Piezo Hit Indication.
  

  

  Piezzo Hit Indicator

  The dependable TTS Piezo Hit Indication has a reliability of hit recording better than 98% for almost all calibers. Hits are reported back to the controller. To obtain perfect results the sensitivity of the sensor can be adjusted remotely by the controller. In the recordable range is live fire ammunition as well as paint ball ammunition.

• Military grade connectors

  Military grade connectors

  TTS uses only 100% scoop proof, military grade connectors.
  

  

  Military Grade Connectors

  TTS uses only 100% scoop proof, hermetic connectors made from high strength aluminum shells and qualified to specifications MIL-DTL-38999, EN 3645 and JN 1034. The olive drab cadmium over nickel shell plating provides even salt spray corrosion protection. The threaded coupling with self-locking ensures anti-vibration integrity.

Technical Specifications

Stationary Infantry Target - MOUT

Target Presentation
Modes of Operation	Pop-Up, Slashing, Turning, Friend/Foe
Time to expose target (typical)	0.8 s
Time to retreat target (typical)	0.8 s

Target Mechanism
Angles of Operation	180°, end positions adjustable
Voltage	12 V
Colors	Nato Olive Drab, other colors upon request

Drive/Motor Unit
Length	230 mm 9.06 in
Width	230 mm 9.06 in
Height	180 mm 7.09 in
Weight	7.8 kg 17.2 lb
Voltage	12 V, 230 V
Other Voltages	available upon request
Available Batteries	12V - 18 Amp/h 12V - 33 Amp/h
Operational Temperature (max.)	65 °C 149.0  °F
Operational Temperature (min.)	-25 °C -13.0  °F

Target Silhouette
Width*	0.5 m 0.55 yd
Height*	1.5 m 1.64 yd
Weight*	5 kg 11.02 lb

Hit Sensoring
Sensored Ammunition	live-fire bullets, practice ammunition and paint balls
Sensitivity	remotely adjustable

* Recommended values
Specifications subject to change. Please contact us for more detailed information.

Compare these specs to those of similar products.

Accessories

Stationary Infantry Target - MOUT

Available accessories for the Stationary Infantry Target - MOUT include:

Thermal Image Simulator (TIS) The TIS provides thermal target signatures to train shooters under conditions of poor visibility Read more..	Sound Effects Simulator (SES) The SES acoustically provides a realistic audio battlefield simulation. Read more..
Muzzle Flash Simulator The optical muzzle flash simulator projects flashed light onto the target silhouette and creates the muzzle flash effect of a hand gun and/or an automatic weapon. Read more..

Comparable Products

Stationary Infantry Target - MOUT

Comparable products for the Stationary Infantry Target - MOUT include:

Stationary Infantry Target - Rotary PopUp The Stationary Infantry Target - Rotary PopUp (Rotary PopUp SIT) allows the presentation of friend/foe targets as well as the use of conventional pop-up targets. Read more..	Stationary Infantry Target - Advanced The Advanced Stationary Infantry Target (Advanced SIT) is our multifunctional and mobile infantry target mechanism for all types of shooting ranges. Read more..
Stationary Infantry Target - Standard The Stationary Infantry Target Standard (Standard SIT) is our type-approved infantry pop up target lifter for permanent installation offering reliability and durability. Read more..