Overview

Stationary Infantry Target - Standard

The type-approved SIT with its time-tested lifting mechanism was designed as a standard pop-up target on live-fire shooting ranges. For decades now this target lifter is serving in military training and has proven to be a dependable and long-lasting tool to train armed forces worldwide.

Mounted permanently on a prepared concrete base, the Standard SIT is typically used outdoor on field fire ranges. It vigorously lifts targets up to 500 mm*1500mm and can be equipped with various accessories to meet customers’ requirements.

At a glance:

• Sturdy pop up target mechanism
• Hard wired and mains supplied
• Adjustable hit sensor
• Very low clearance
• User-friendly
• Robust housing

The Stationary Infantry Target - Standard is also referred to as Infanterieklappscheibe, IKS, NGATS SIT, Standard SIT, PopUp SIT, Pop Up Target, Pop-Up-Target, Standard Infantry Lifter..

Features

General Features

The Standard SIT, equipped with a hard-wearing electro gear, lifts marksmanship training targets or animates infantry target silhouettes to simulate threats jumping out of cover. The permanently mounted mechanism can raise and lower targets upon command of a herewith-required operator's console and can report hits back to the controller. The factory setting lets the target lower after a positive hit report. Electro gear, gear wheels and electronics are protected in a watertight cast aluminum housing for dependable and long life operation.

• Realistic Training Environment

  Realistic Training Environment

  TTS products increase training realism and stress.
  

  

  Realistic Training Environment

  Several add-ons and accessories are available for TTS target mechanisms to increase training realism and stress.
  

  Enemy fire simulators and hit indicators are added to the target appliances and are used to give a more realistic training environment. The simulators make use of standard pyrotechnic ammunition or are non -pyrotechnic simulators, increasing the safety of the range personnel while reducing the life cycle costs. As more and more modern weapon systems are equipped with infrared night visors, all our target appliances can be equipped with thermal target heating systems, which provide a thermal image on the target that can be clearly identified.

• Pop Up or Lifting Mode

  Pop Up or Lifting Mode

  The target raises out of a cover and lowers.
  

  

  Pop Up Mode - Raised

  This conventional mode allows the presentation of a target raising out of a cover and lowering to hide behind a drawback.
  

Economical Features

This stationary infantry target is using down to earth, almost unbreakable technology and thus delivers the dependability our customers need to maximize operational training productivity. The use of approved, corrosion free materials reduces failures caused by environmental influences and thus customer’s maintenance costs considerably.

• Energy Efficiency

  Energy Efficiency

  Finely tuned electrical and mechanical engineering provides this Theissen target lifter with an extraordinary energy efficiency.
  

  

  Sorry, Image will be uploaded soon...

  With its standard 12 V-36 Ah battery the highly efficient design allows up to 20.000 movements (10.000 cycles) without charging.
  
  

Components

• Piezo Hit Indication

  Piezo Hit Indication

  TTS Target equipment is supplied with a remotely adjustable Piezo Hit Indication.
  

  

  Piezzo Hit Indicator

  The dependable TTS Piezo Hit Indication has a reliability of hit recording better than 98% for almost all calibers. Hits are reported back to the controller. To obtain perfect results the sensitivity of the sensor can be adjusted remotely by the controller. In the recordable range is live fire ammunition as well as paint ball ammunition.

• Military grade connectors

  Military grade connectors

  TTS uses only 100% scoop proof, military grade connectors.
  

  

  Military Grade Connectors

  TTS uses only 100% scoop proof, hermetic connectors made from high strength aluminum shells and qualified to specifications MIL-DTL-38999, EN 3645 and JN 1034. The olive drab cadmium over nickel shell plating provides even salt spray corrosion protection. The threaded coupling with self-locking ensures anti-vibration integrity.

• Target Fastener Standard SIT

  Target Fastener Standard SIT

  The target fastener is mounted to the Stationary Infantry Target -Standard
  

  

  Target Fixture Standard SIT

  To avoid heavy weight this arm is made from high-grade cast alloy and to make it wear resistant it is supported with stainless steel inlays.

  The lightweight aluminum target fastener is stainless steel reinforced and powder coated. Little weight allows swift movements, reinforcement prevents creep fatigue and powder coating ensures weather resistance.
  

  The target fastener accepts most standard target silhouettes.
  

  At a glance:

  • High Grade Cast Aluminum
  • Low Weight
  • Stainless Steel Reinforced

Technical Specifications

Stationary Infantry Target - Standard

Target Presentation
Modes of Operation	Pop-Up
Time to expose target (typical)	0.8 s
Time to retreat target (typical)	0.8 s

Target Mechanism
Angles of Operation	90°, end positions adjustable
Voltage	230 V
Other Voltages	available upon request
Operational Temperature (max.)	65 °C 149.0  °F
Operational Temperature (min.)	-25 °C -13.0  °F
Colors	Nato Olive Drab
Dimensions with Frame
Length	925 mm 36.42 in
Width	380 mm 14.96 in
Height	250 mm 9.84 in
Dimensions without Frame
Length	330 mm 12.99 in
Width	400 mm 15.75 in
Height	200 mm 7.87 in

Target Silhouette
Width*	0.5 m 0.55 yd
Height*	1.5 m 1.64 yd
Weight*	5 kg 11.02 lb

Hit Sensoring
Sensored Ammunition	live fire bullets, practice ammunition and paint balls
Sensitivity	remotely adjustable

* Recommended values
Specifications subject to change. Please contact us for more detailed information.

Compare these specs to those of similar products.

Accessories

Stationary Infantry Target - Standard

Available accessories for the Stationary Infantry Target - Standard include:

Sound Effects Simulator (SES) The SES acoustically provides a realistic audio battlefield simulation. Read more..	Muzzle Flash Simulator The optical muzzle flash simulator projects flashed light onto the target silhouette and creates the muzzle flash effect of a hand gun and/or an automatic weapon. Read more..
Gel Batteries Gel batteries assuring safe usage, good weather resistance and reduced maintenance are supplied with most TTS products Read more..	Stainless Steel Frame For this product powder coated stainless steel frames are available. Read more..
Thermal Target Adapter With this adapter this product can be equipped with Thermal Target Hardware afterwards Read more..

Comparable Products

Stationary Infantry Target - Standard

Comparable products for the Stationary Infantry Target - Standard include:

Stationary Infantry Target - Advanced The Advanced Stationary Infantry Target (Advanced SIT) is our multifunctional and mobile infantry target mechanism for all types of shooting ranges. Read more..	Stationary Infantry Target - MOUT This highly flexible infantry target system is ideal for CQB training camps and MOUT ranges. Read more..
Stationary Infantry Target - Deployable The Deployable Stationary Infantry Target (Deployable SIT) is a deployable and multifunctional version of Advanced SIT. Read more..